The textile machinery needs to be equipped with safety protection measures.

Textile machinery possesses various characteristics, such as processability, low pollution, standardization, and generalization. It also requires safety protection. The detailed analysis is as follows:

1. All types of mechanical equipment and facilities must ensure that any rotating parts or shafts are equipped with protective covers, any trenches or wells are covered, and any platforms have railings;

2. All kinds of mechanical and electrical equipment must have complete and reliable safety protection devices, signal devices, alarm devices, safety devices, limit devices, and interlock devices. It is prohibited to use obsolete equipment and unsafe homemade equipment;

3. After the maintenance of various mechanical equipment, the safety protection devices such as covers, guards, and sleeves must be restored to their original positions in a timely manner, and the safety protection of the machinery must be maintained intact;

4. Strip winding and sizing machine: The safety guard and emergency stop device must be in good condition, sensitive, and equipped with infrared interlock devices. The rotation direction should ensure convenient operation, and reverse operation is encouraged;

5. Drying machine: The connecting shafts of the opening and transfer printing machine: The fixing screws of the side-mounted complete machine shafts must be securely installed with internal hexagon countersunk screws. Safety measures must be set up for the pedestrian passage;

6. Coating machine: Large rolls should be reversed, the centering machine should have protective devices, the rolling machine should have guard rods, and gas concentration alarms and static elimination devices should be installed;

7. Rolling machine: A guard rod is added between the two rollers, and an emergency braking device is provided;

8. Unwind machine: The rolled-up part must have an emergency braking device;

9. Centrifugal dehydrator: The inner container and outer shell must be firmly fixed, with no loose, fallen, broken, or severely rusted screws or nuts, and the dehydrator must be covered and the opening and closing of the cover must have a locking device;

10. Open-type mixing equipment must be covered or shielded.